Data Highway Plus is a networking system made by the Allen-Bradley Company (now called Rockwell Automation). It is a networking protocol suite for manufacturing automation. It is normal in networking innovation to express protocols in layers of capacities. The Data Highway Plus suite contains three layers. These are the physical layer, the data join layer and the application layer.
The Data Highway Plus protocol give directions to a PLC (programmable logic controller) that controls a bit of modern apparatus. The protocol indicates a message packet format to convey these commands. The message header contains a byte each to clarify the source of the message, the destination of the message and the command to be executed. There is additionally, alternatively, a capacity byte. The answer to this command will answer in a packet headed by source, destination and summon bytes, trailed by maybe a couple bytes for status codes. Summons and reactions are coordinated together by a TNS (“transaction”) code. The reaction to a summon will contain the TNS of the charge to which it is an answer. Both the summon message and the reaction message can alternatively contain a data segment.
Data Highway Plus Interfaces
|Cat. No.||Function||Communication Interface||Communication Rates|
|1784-PKTX, 1784-PKTXD||PKTx Communication Card§||Performs data transmission, management, and local network diagnostics for PLC-5 processors over DH+ networks. The 1784-PKTXD has two ports for DH+ communication.||1770-CD (Belden #9463)||• 762 m (2,500 ft) @ 230,400 bit/s|
• 1,524 m (5,000 ft) @ 115,200 bit/s
• 3,048 m (10,000 ft) @ 57,600 bit/s
|0.8A @ 5V DC|
|1784-U2DHP||USB to Data Highway Plus cable||Program PLC-5 or SLC 5/04 processors using a personal computer and RSLogix 5 or 500 Programming Software; lets a DH+ host with RSLinx software communicate directly with DH+ stations||USB port on computer to 8-pin mini-DIN connector on controller.||• DH+: 57,600; 115,200; 230,400||Powered through USB|
|1756-DHRIO||DH+/RIO Communication Interface Module||• Provides gateway functionality between ControlNet, Ethernet, and DH+ networks|
• Provides scanner functionality to Universal Remote I/O links adapters
|2 ports: DH+ or Universal Remote I/O||• For DH+: 57,600, 115,200, or 230,400|
• For Universal Remote I/O: 57,600, 115,200, or 230,400
|• 710 mA @ 5V DC|
• 1.7 mA @ 24V DC
|1771-AF||Fiber-Optic Converter Module||Allows DH+ and Remote I/O signals to travel over fiber-optic cable for routing through electrically noisy environments; converts twinax electrical signals to light (for transmission over fiber-optic cable), and then converts the light back to electrical signals (for transmission on twinax)||• Twinax|
• Fiber-optic pre-terminated cables, 1771- PT2 (75 m)
|57,600 and 115,200||600 mA|
|1771-AF1||Fiber Optic Converter (Stand-alone)||1A|
ANC-100e Ethernet IP to AB's DH+ Converter
The Automation Networks ANC-100e communicates with all SCADA, HMI, PLC programming with direct Ethernet/IP access to the DH+ network and stations.
ANC-100e has similar replacement features as the Controllogix 1756-DHRIO / 1756-ENBT, and AB 1784 Interface Cards: 1784-U2DHP, 1784-KTx, 1784-PKTx, 1784-PCMK and Prosoft AN-X2-DHRIO Converters.
$1,295 USD List. Sept 1, 2023
Overnight Shipping Available
ANC-120e USB to AB's DH+
The ANC-120e works with all SCADA, MMI, PLC programming packages installed on your PC with USB direct access to the DH+ network and stations. These packages include RSLINX/LOGIX Classic & Enterprise with RSLOGIX 5/500, Wonderware DAServer & TCP/IO Server, Citect, and Kepware using Controllogix Ethernet/IP Drivers.