BACnet/IP BBMD

The BBMD advances a BACnet broadcast message started by a BACnet/IP device on its subnet to others subnets with BACnet/IP devices. Upon landing in a destination subnet, the message is then show on that subnet.

The BACnet BBMD device is streamlined for high data transfer capacity use because of its 32-bit inserted Linux-based OS and our BACstac/32 protocol stack. This BACnet software is big and is the main outsider BACnet code utilized as a part of a huge number of devices from from important industry manufacturerss.

The B3060 is encased in a metal case that can be mounted standalone, in a 1U rack or on a DIN rail.

The Ethernet port uses a standard protected RJ45 connector with integral LEDs. Association status can quickly be discovered from the Link and Activity LEDs on every interface.

An inserted web server allows for configuration and solve problems via a standard web browser. A force LED is available alongside the LEDs for interface status on every interface.

IP system support:

• Web server for commisioning and solve problems

• Statistics page for diagnostics

• Secure login to web configuration and status interfaces

• BACnet/IP Broadcast Management Device (BBMD)

• Foreign Device Support (FDS)

Standard Communications:

• 10/100 Mbps Ethernet.

• Convenient Installation

The ANC-100e DH+ converters provide communications between newer Ethernet Technologies and DH+ legacy PLC-5s and SLC/504s

The ANC-100e is a pocket-sized, high performance, Industrial Rated Ethernet DH+ Converter.  Features include: Ease of Configuration via Web Interface and DH+ Auto Polarity Detection and DH+ Auto Baud Rate Detection.

$1,295 USD List.

20 min. theautomationblog review.

Data Highway Plus to Ethernet (S02)

The ANC-120e is a competitive alternative to AB’s 1784-U2DHP PLC Programming Cable

Is an economical and high performance USB-to-Allen-Bradley Data Highway Plus converter interfacing major HMI, SCADA, PLC Programming packages to Devices on DH+. Its features significantly outperform AB’s 1784-U2DHP PLC Programming Cable operating at 12 Mg USB speed with the Controllogix Ethernet/IP Driver.
The ANC-120e works with all SCADA, MMI, PLC programming packages installed on your PC with USB direct access to the DH+ network and stations. These packages include RSLINX/LOGIX Classic & Enterprise with RSLOGIX 5/500, Wonderware DAServer & TCP/IO Server, Citect, and Kepware using Controllogix Ethernet/IP Drivers.
$1,295 USD List. 

20 min. theautomationblog review

http://theautomationblog.com/usb-to-data-highway-plus-using-the-anc-120e-a-lower-cost-alternative-to-the-1784-u2dhp/ for more detailed info.